In/Out Ranges and Markers Tab

Reeltime Pro’s in/out ranges and markers tab lives within the upper right side of the main view (between the slot settings and the global metadata tabs). 

The tab shows all in/out ranges and markers of the currently running recording (live mode), or the currently loaded clip (playback mode). If the current recording/clip belongs to a group, all in/out ranges also apply to all associated group recordings/group clips. The same applies to group markers and the group thumbnail frame. 

The in/out ranges and markers tab has three sub-tabs, “In/Out”, “Markers” and “All”. The “All” tab displays all elements of both the “In/Out” and “Markers” tab in one view. The “In/Out” and “Markers” tabs are explained in more detail below.

In/Out Ranges Tab

The In/Out tab displays all in/out ranges of the selected slot’s recording or loaded clips:

In/out ranges toolbar

• In/Out Ranges Toolbar: A toolbar at the top of the list provides buttons for the most important in/out ranges-related actions:
  • Set In
    • sets an in-point at the current position of the recording (live mode),
    • or at the current playhead position (playback mode)
  • Set Out
    • sets an out-point at the current position of the recording (live mode),
    • or at the current playhead position (playback mode)
  • Set New Range With In at Playhead Position
    • adds a new range with an in-point at the current playhead position (playback mode only)
  • Set New Range With Out at Playhead Position
    • adds a new range with an out-point at the current playhead position (playback mode only)
  • Jump to Previous In
    • moves the playhead to the previous in-point (playback mode only)
  • Jump to Next In
    • moves the playhead to the next in-point (playback mode only)

In/out ranges list

• In/Out Ranges List: Below the toolbar, there is a list view where you can inspect all in/out ranges of the clip and edit their information or navigate to their in-points or out-points:
  • Rating 
    • allows setting a rating (no rating – 5 stars) by clicking on the stars or using the associated menu items, keyboard shortcut, or Stream Deck controller actions
  • Note field
    • allows adding a text note:
      • click into the field or use the tab key to enter it,
      • after typing your desired note text, you can exit the field with the keyboard shortcut Cmd-Enter
  • In/Out and duration
    • lets you inspect the in-point’s and out-point’s timecodes and the duration of the range
    • and jump to the in-point or out-point by clicking on the reveal buttons after the timecode labels
• Contextual menu: The in/out ranges list provides various contextual menu items via a right-click on an in/out range (multi-selection is possible for some items only):
  • Jump to In
  • Jump to Out
  • Set Rating
  • Remove
  • Copy Ranges to Text

Markers Tab

The Markers tab displays all markers of the selected slot’s recording or loaded clips:

Markers tab

• Markers Toolbar: A toolbar at the top of the list provides buttons for the most important marker-related actions:
  • Set Default Marker Type
    • defines the marker type for the next marker
    • select from eight colored marker types that you can customize in a “Marker Names” box within the library settings
  • Set Marker
    • sets a marker at the current position of the recording (live mode),
    • or at the current playhead position (playback mode)
  • Set Marker for Group
    • sets a marker for all recordings of the group at the current position of the recording (live mode),
    • or for all clips of the group at the current playhead position (playback mode)
  • Set Marker Out for Selected Marker
    • sets a marker out point for a selected marker at the current position of the recording (live mode) / at the current playhead position (playback mode)
  • Move Selected Marker In to Playhead Position
    • moves a selected marker to the current position of the recording (live mode) / to the current playhead position (playback mode)
      • if the marker is a range only the in point of the maker is moved
  • Set Thumbnail Frame
    • sets the thumbnail frame at the current position of the recording (live mode),
    • or at the current playhead position (playback mode)
  • Set Thumbnail Frame for Group
    • sets the thumbnail frame for all recordings of the group at the current position of the recording (live mode),
    • or for all clips of the group at the current playhead position (playback mode)

Markers list

• Markers List: Below the toolbar, there is a list view where you can inspect all markers of the clip and edit their information or navigate to their marked position or in and out-points:
  • Rating 
    • allows setting a rating (no rating – 5 stars) by clicking on the stars or using the associated menu items, keyboard shortcut, or Stream Deck controller actions
  • Marker Type
    • allows changing the marker’s type by choosing a type from the drop-down or using the associated menu items, keyboard shortcut, or Stream Deck controller actions

    • Note: You can customize the marker names of your project in the library settings

  • Group Marker/Single Marker
    • allows setting the group state of the marker via the drop-down or using the associated menu item, keyboard shortcut, or Stream Deck controller action
  • Note field
    • allows adding a text note:
      • click into the field or use the tab key to enter it,
      • after typing your desired note text, you can exit the field with the keyboard shortcut Cmd-Enter
  • In/Out and duration
    • lets you inspect the marked frame position’s timecode or (for marker ranges) the in-point’s and out-point’s timecodes and the duration of the range
    • and jump to the marked frame position or in-point/out-point by clicking on the reveal buttons after the timecode labels
• Contextual menu: The marker list provides various other contextual menu items via a right-click on a marker (multi-selection is possible for some items only):
  • Jump to Marker In
  • Jump to Marker Out
  • Cut
  • Copy
  • Change Marker Type
  • Change Group State
  • Set Rating
  • Move Marker In to Playhead Position
  • Set Marker Out to Playhead Position
  • Remove Marker Out
  • Remove Marker
  • Copy Markers to Text

Remove, copy, cut, and paste markers

You can remove markers by selecting one or multiple marker(s) in the list and pressing the backspace key. Furthermore, you can copy, cut, and paste one selected marker to move or duplicate it to another position in the same clip or to paste it into another clip. There are also associated menu items and Stream Deck controller actions to remove, copy, cut, and paste markers.

A “Copy Markers to Text” contextual menu item allows pasting the info of one or multiple selected markers into a text document.

The post In/Out Ranges and Markers Tab appeared first on Pomfort Knowledge Base.